Alfa Transaxle forum
Transaxle forum => Transaxle international => Autor teme: kobrakai - Sub 12:13:45 02.06.2012.
-
hi all decided on your forum to have a log book, I hope that he will not be removed :D:.
The first entry will not be very long. I want to say that at this point the car is without engine and get ready for welding and painting.
Twin Spark engine is sold in its place V6 12V Busso purchased from 164 AR.
do not remember exactly, but like the engine code (AR-64012)
-
photo
[privitak je izbrisao admin]
-
next photo
[privitak je izbrisao admin]
-
:D:
[privitak je izbrisao admin]
-
:good:
I wish you luck
-
at the beginning of the initial examination showed, that the machine is dead :tuga:, well perhaps not quite dead, but like a zombie :D:
wonderful grip is not clear how the machine, but certainly not with the Alfa Romeo, all this has long been corrected and replaced
[privitak je izbrisao admin]
-
:good:
I wish you luck
hvala :D:
[privitak je izbrisao admin]
-
:sablja: :sablja:
i see, you dont missing rust :D:
good luck with that :bravo: :bravo:
-
:sablja: :sablja:
i see, you dont missing rust :D:
good luck with that :bravo: :bravo:
thanks, by the way about the rust, that photo as my friend was reduced AR 75 :zloco:
[privitak je izbrisao admin]
-
photo
[privitak je izbrisao admin]
-
and now this Alfa have a that look :drink:
and recently put Porsche calipers :zloco:
[privitak je izbrisao admin]
-
nice work my friend ... get the body sorted and painted ... find yourself all the conversion parts you need and enjoy your new alfa V6 :good:
-
nice work my friend ... get the body sorted and painted ... find yourself all the conversion parts you need and enjoy your new alfa V6 :good:
thanx!
I admire your work on AR 75. I want to learn your experience. :crveni:
I want to ask you, how can i raise the power of the engine? V6. I want pierced intake ports to make larger the diameter, to buy the chip from squadra tuning and right exhaust, maybe SCS.
incidentally found in the engine compartment a lot of microcracks. :tuga: how best to strengthen and what better place magnifies? spars?
p.s. someone ever goes to the EURO-2012 in Ukraine?
-
thanx!
I admire your work on AR 75. I want to learn your experience. :crveni:
I want to ask you, how can i raise the power of the engine? V6. I want pierced intake ports to make larger the diameter, to buy the chip from squadra tuning and right exhaust, maybe SCS.
incidentally found in the engine compartment a lot of microcracks. :tuga: how best to strengthen and what better place magnifies? spars?
p.s. someone ever goes to the EURO-2012 in Ukraine?
buy one of these and read
http://www.ebay.co.uk/itm/Alfa-Romeo-V6-Engine-High-Performance-Manual-Book-Jim-Kartalamakis-NEW-PB-/330715915620?pt=Non_Fiction&hash=item4d00346564 (http://www.ebay.co.uk/itm/Alfa-Romeo-V6-Engine-High-Performance-Manual-Book-Jim-Kartalamakis-NEW-PB-/330715915620?pt=Non_Fiction&hash=item4d00346564)
euro 2012 ... I'll be watching from couch with a beer or in a pub
microcraks in the engine bay ... I'm not an expert on that subject ... sorry man :good:
-
heard about this book, thanks for the link already bought))) I wanted to ask, I left the transmission of the TS, I thought to look on the V6, but a friend said to me, to left on TS, as the dynamics and acceleration will be better
your opinion on this?) Well, everything is logical, short transmission, faster acceleration, but more gear shifts and less than the max. speed
interested in what! I've seen the video of one dude of this forum, he was driving 260 on the speedometer! seems to me it is generally unrealistic speed for Alfa 75
-
I've seen the video of one dude of this forum, he was driving 260 on the speedometer! seems to me it is generally unrealistic speed for Alfa 75
Not if you threw your alfa out from the airplane :D:
-
heard about this book, thanks for the link already bought))) I wanted to ask, I left the transmission of the TS, I thought to look on the V6, but a friend said to me, to left on TS, as the dynamics and acceleration will be better
your opinion on this?) Well, everything is logical, short transmission, faster acceleration, but more gear shifts and less than the max. speed
interested in what! I've seen the video of one dude of this forum, he was driving 260 on the speedometer! seems to me it is generally unrealistic speed for Alfa 75
your friend told you what most of us use on our cars .... most of us use 3L engine and TS gearbox ... we found that perfect combo for us .... that dude that you saw driving 260kph ... dont belive everything you see ... spedo was showing 260 but gps said 230 ... he has 24v 230 bhp engine with 1.8t gearbox ... also have in mind that inch size of the tyres is also involved how fast the car will go
-
Kobrakai don't believe nothing, tomo75 is a jealous on my 260 :DD:
-
Tomo didn't write that I did under his name so don't get confused boys
-
Tomo didn't write that I did under his name so don't get confused boys
we know this, at least I knew
-
your friend told you what most of us use on our cars .... most of us use 3L engine and TS gearbox ... we found that perfect combo for us .... that dude that you saw driving 260kph ... dont belive everything you see ... spedo was showing 260 but gps said 230 ... he has 24v 230 bhp engine with 1.8t gearbox ... also have in mind that inch size of the tyres is also involved how fast the car will go
Yes, of course, if the other tires in the run-rate will be. but if you check the tyre calculator, 205 \ 40 \ R17, the minimum take-off run, though I do not know what tires this guy, I compared to the my tyres ))
-
By the way, what the optimal size of tire \ wheels?
-
has purchased carbon fiber hood GFK Motorsport, weight 4.3 kg :yahoo:
[privitak je izbrisao admin]
-
Yes, of course, if the other tires in the run-rate will be. but if you check the tyre calculator, 205 \ 40 \ R17, the minimum take-off run, though I do not know what tires this guy, I compared to the my tyres ))
I'm that guy (in case you didn't realized until now), so ask me
I'm runing 205/45/16
-
has purchased carbon fiber hood GFK Motorsport, weight 4.3 kg :yahoo:
how much did you pay for the hood :82:
-
this is not carbon hood, that's 1st
2nd, this picture is from Czech guy close to German border we were planing to buy in first round and then decided to purchase locally in HR
http://www.ebay.de/itm/Alfa-Romeo-75-Motorhaube-Leicht-GFK-Motorsport-/110781245174?_trksid=p4340.m185&_trkparms=algo%3DDLSL%252BSIC.NPJS%26its%3DI%26itu%3DUCI%252BUA%26otn%3D10%26pmod%3D110751260331%252B110751260331%26po%3D%26ps%3D63%26clkid%3D8901118937069515454 (http://www.ebay.de/itm/Alfa-Romeo-75-Motorhaube-Leicht-GFK-Motorsport-/110781245174?_trksid=p4340.m185&_trkparms=algo%3DDLSL%252BSIC.NPJS%26its%3DI%26itu%3DUCI%252BUA%26otn%3D10%26pmod%3D110751260331%252B110751260331%26po%3D%26ps%3D63%26clkid%3D8901118937069515454)
-
how much did you pay for the hood :82:
I paid for it 260 euros and understand what makes a mistake,because the link GRDI it is much cheaper and so it is not carbon fiber, this fiberglass, I just do not know exactly how it sounds in english
these photos will be next week, when he will be in my arms, they still want to buy a trunk lid that weighs 900 grams
-
this is not carbon hood, that's 1st
2nd, this picture is from Czech guy close to German border we were planing to buy in first round and then decided to purchase locally in HR
[url]http://www.ebay.de/itm/Alfa-Romeo-75-Motorhaube-Leicht-GFK-Motorsport-/110781245174?_trksid=p4340.m185&_trkparms=algo%3DDLSL%252BSIC.NPJS%26its%3DI%26itu%3DUCI%252BUA%26otn%3D10%26pmod%3D110751260331%252B110751260331%26po%3D%26ps%3D63%26clkid%3D8901118937069515454[/url] ([url]http://www.ebay.de/itm/Alfa-Romeo-75-Motorhaube-Leicht-GFK-Motorsport-/110781245174?_trksid=p4340.m185&_trkparms=algo%3DDLSL%252BSIC.NPJS%26its%3DI%26itu%3DUCI%252BUA%26otn%3D10%26pmod%3D110751260331%252B110751260331%26po%3D%26ps%3D63%26clkid%3D8901118937069515454[/url])
make detailed pictures, as it will be in my arms ;)
-
I'm that guy (in case you didn't realized until now), so ask me
I'm runing 205/45/16
you have a really nice car...why not 3.2 24v?
-
you have a really nice car...why not 3.2 24v?
Thanks...why to go for 3.2?
my engine:
3.0 24v from 164 Q4 -> 232bhp (this engine was available and easier to set)
3.2 versions:
3.2 24v from GT or 166 -> 240bhp (hard to find and didn't have will and time for searching plus issues with key code etc...)
3.2 24v from 156/147 GTA -> 250bhp (not reliable compare to models above + very the same issues with installation)
for the gain of 8bhp or 18bhp you don't complicate your life :nod:
-
I paid for it 260 euros and understand what makes a mistake,because the link GRDI it is much cheaper and so it is not carbon fiber, this fiberglass, I just do not know exactly how it sounds in english
these photos will be next week, when he will be in my arms, they still want to buy a trunk lid that weighs 900 grams
260€ and carbon hood make sense...this hood on picture and hoods we ordered are from fiberglass as you wrote
weight is more or less the same, our hoods are approximately 4.5kg...issue is with firmness and twist...carbon is better here
-
Thanks...why to go for 3.2?
my engine:
3.0 24v from 164 Q4 -> 232bhp (this engine was available and easier to set)
3.2 versions:
3.2 24v from GT or 166 -> 240bhp (hard to find and didn't have will and time for searching plus issues with key code etc...)
3.2 24v from 156/147 GTA -> 250bhp (not reliable compare to models above + very the same issues with installation)
for the gain of 8bhp or 18bhp you don't complicate your life :nod:
in your words is actually a lot of sense. just now thought that is really 3.0 24V and a chip on squadra and we cover those 240-245 hp
Although the matter is that the engine crankshaft 3.2 GTA appreciated. on which to build 3.7
-
Today came the hand to Busse. One pulled back the cover of the head, visually, all just great! My mechanic tells me that the change of the rubber gaskets and globally, and the engine not to climb, as it is in excellent condition.
[privitak je izbrisao admin]
-
and of course the microcracks.
sadness :tuga:
[privitak je izbrisao admin]
-
06412 AR 164 184 лошади :bok:
-
in your words is actually a lot of sense. just now thought that is really 3.0 24V and a chip on squadra and we cover those 240-245 hp
Although the matter is that the engine crankshaft 3.2 GTA appreciated. on which to build 3.7
in my words I'll not search for 3.2 when I have 3.0 24v Q4 or QV engine available
why to do this? what is benefit? 8/18 bhp, not to me...
try to fit 3.2, you have to overcome additional issues compare to standard 24v from 164
you can build 3.7 very easy from any busso, just give me a money...
squadra chip is a game for rookies...if I'll tune engine then will be like it should be...program engine management and ITB's
-
Of microcracks wrote a photo is not posted :D:
[privitak je izbrisao admin]
-
06412 AR 164 184 лошади :bok:
говоришь по русски? :drink:
-
in my words I'll not search for 3.2 when I have 3.0 24v Q4 or QV engine available
why to do this? what is benefit? 8/18 bhp, not to me...
try to fit 3.2, you have to overcome additional issues compare to standard 24v from 164
you can build 3.7 very easy from any busso, just give me a money...
squadra chip is a game for rookies...if I'll tune engine then will be like it should be...program engine management and ITB's
I hold the position of your point of view. I am also impressed with the 164 version of the 3.0 24v, but as I recall, that the 3.7 engine is based on the crankshaft of 3.2, are the ones that 400 + hp
-
I forgot to write, you said that the chip from squadra is for rookie. I'm a rookie. :D:
-
Of microcracks wrote a photo is not posted :D:
Holy mary mother of god! I can't belive what I just saw. :shock: That is in engine bay? How that happend??
-
Holy mary mother of god! I can't belive what I just saw. :shock: That is in engine bay? How that happend??
Oh, my friend! This picture is under the hood, this is a normal fact in Ukraine. We have a lot of drivers, which is distorted over their cars and Alfa Romeo this non-exclusion. We call these craftsmen: farmers. inventions and their farm-tuning. I'm not sure that English is the meaning of sounds, as well as in our country.) The normal practice of these people are put in the Alfa Romeo, рarts from Lada :D:
You just take a look at what they do with their cars :DD:
[privitak je izbrisao admin]
-
Oh, well, when you install parts from another cars (let's say lada :D: ) to your alfa it is crucial to stick with one rule; donator car must have be the lada sport. How do you recognize lada sport? Well, easey: lada sport on a trailer towing hook have a tennis ball :nod: :super:
:DD:
-
Kakav je ovo cirkus :DD: :DD:
-
Kakav je ovo cirkus :DD: :DD:
You do not understand, this is a amazing country - Tuning :DD:
-
in case we are passing group C we're coming :D:
tomorrow morning I'm traveling to Poznan, Polska for a first two maches...
-
The Slavs best
[privitak je izbrisao admin]
-
it looks that way :super:
-
Privitak nije moguće spremiti. Ovo se dogodilo jer je proteklo previše vremena za prijenos datoteke na poslužitelj ili je datoteka prevelika za prihvat na poslužitelju.
Molimo da konzultirate administratora ovog poslužitelja za daljnju pomoć.
-
Why can not I add photos, who knows?
-
maybe they are too big maximum size per picture is 500KB
try http://tinypic.com/ (http://tinypic.com/)
-
that's what they write:
Došlo je do Greške!
Privitak nije moguće spremiti. Ovo se dogodilo jer je proteklo previše vremena za prijenos datoteke na poslužitelj ili je datoteka prevelika za prihvat na poslužitelju.
Molimo da konzultirate administratora ovog poslužitelja za daljnju pomoć.
-
interest in this question: if the engine is put on 12v to 24v 45mm pipes, which is estimated to increase capacity? at 24V with a 211 hp to 232 hp, really impressed)
-
Don't know how much bhp you can get with only 45mm pipes,intake and exhaust ports should be widened on the cylinder heads to get real increase in bhp,see what kartalamakis did in his book,he explained it very well in his book
-
(http://s3.images.drive2.ru/car.journal.photos/x8/0400/000/000/523/058/48cf257c4db6f892-large.jpg)
-
(http://s3.images.drive2.ru/car.journal.photos/x8/0400/000/000/523/02d/48cf257b80234108-large.jpg)
(http://s3.images.drive2.ru/car.journal.photos/x8/0400/000/000/523/02e/48cf257b885de2db-large.jpg)
-
back to the question of Bill B6
(http://a.d-cd.net/b9ed4v/960.jpg)
(http://a.d-cd.net/e5ed4v/960.jpg)
(http://a.d-cd.net/b5ed4v/960.jpg)
-
interest in this question: if the engine is put on 12v to 24v 45mm pipes, which is estimated to increase capacity? at 24V with a 211 hp to 232 hp, really impressed)
You will loose some (torque) and gain some (hp), but without remap - engine will work with lean mixture. Best bet is to try and do some tests with acceleration.
Nice Bilsteins!!! Me wants them too! :good:
-
:tuga:
[privitak je izbrisao admin]
-
:neznam: typical for rusty 75. Nothing that can't be solved vith grinder and welding machine :D: Vhen you're done with bodywork, make shure that you use good rust protection otherwise you will find yourself with grinder in your hands soon. :sablja: :sablja:
-
с
[privitak je izbrisao admin]
-
с
[privitak je izbrisao admin]
-
с
[privitak je izbrisao admin]
-
what happened to your mobile phone :82: :DD:
-
тормоза 305 будут ? :good:
-
тормоза 305 будут ? :good:
:82: :D:
-
what happened to your mobile phone :82: :DD:
this normal condition for my iphone :D:
-
тормоза 305 будут ? :good:
неет)) будут 312 мм от А6
nooup) 312 mm from A6
-
тормоза 305 будут ? :good:
biti će 305 kočnice? :D:
-
biti će 305 kočnice? :D:
da je to. :D:
-
у
[privitak je izbrisao admin]
-
с
[privitak je izbrisao admin]
-
:super: :good:
-
u tom procesu. :good:
-
all that hard work,and in the and all u got is a rust-free 75 :D:
nice work :bok: :good:
-
stay tune
[privitak je izbrisao admin]
-
suka bled :D:
-
:bravo: hp?? 211 super
-
:bravo: hp?? 211 super
noup :D:
64304 - 232 h.p. wrroooomm wrroooommm :zloco:
-
(http://cs319831.vk.me/v319831123/895a/uXotQaIAd1E.jpg)
(http://cs319831.vk.me/v319831123/8982/om1pm7d3R0M.jpg)
(http://cs319831.vk.me/v319831123/898c/bqr_8y1kLDw.jpg)
(http://cs319831.vk.me/v319831123/8996/2yQhfZBBlYc.jpg)
(http://cs319831.vk.me/v319831123/89a0/9eNtBkuJMJ8.jpg)
-
перед покраской сделали примерку, встал как родной :twisted:
(http://g.a.d-cd.net/da78f18s-960.jpg)
(http://a.a.d-cd.net/ba78f18s-960.jpg)
(http://b.a.d-cd.net/4678f18s-960.jpg)
(http://h.a.d-cd.net/2678f18s-960.jpg)
(http://g.a.d-cd.net/e678f18s-960.jpg)
(http://a.a.d-cd.net/7678f18s-960.jpg)
(http://h.a.d-cd.net/ce78f18s-960.jpg)
(http://f.a.d-cd.net/5e78f18s-960.jpg)
(http://h.a.d-cd.net/3e78f18s-960.jpg)
(http://e.a.d-cd.net/be78f18s-960.jpg)
(http://g.a.d-cd.net/4178f18s-960.jpg)
(http://e.a.d-cd.net/6178f18s-960.jpg)
-
Снова сварные работы. Что теперь имеем:
1. Новый телек
2. Универсальные платформы под опоры.
3. Усиленные все лонжероны морды и убраны косяки.
4. Заварили дырку под антенну
(http://e.a.d-cd.net/aec7898s-960.jpg)
(http://b.a.d-cd.net/6ec7898s-960.jpg)
(http://e.a.d-cd.net/1ec7898s-960.jpg)
(http://d.a.d-cd.net/dec7898s-960.jpg)
(http://c.a.d-cd.net/3ec7898s-960.jpg)
(http://a.a.d-cd.net/a1c7898s-960.jpg)
(http://a.a.d-cd.net/91c7898s-960.jpg)
(http://e.a.d-cd.net/51c7898s-960.jpg)
(http://b.a.d-cd.net/9c7898s-960.jpg)
(http://a.a.d-cd.net/a9c7898s-960.jpg)
(http://f.a.d-cd.net/69c7898s-960.jpg)
(http://h.a.d-cd.net/d9c7898s-960.jpg)
(http://h.a.d-cd.net/85c7898s-960.jpg)
(http://d.a.d-cd.net/45c7898s-960.jpg)
(http://e.a.d-cd.net/a5c7898s-960.jpg)
(http://b.a.d-cd.net/65c7898s-960.jpg)
(http://e.a.d-cd.net/15c7898s-960.jpg)
-
engine time soon :sablja:
(http://a.a.d-cd.net/a3445b8s-960.jpg)
(http://b.a.d-cd.net/63445b8s-960.jpg)
(http://a.a.d-cd.net/13445b8s-960.jpg)
(http://d.a.d-cd.net/d3445b8s-960.jpg)
(http://f.a.d-cd.net/b3445b8s-960.jpg)
(http://b.a.d-cd.net/f3445b8s-960.jpg)
(http://c.a.d-cd.net/db445b8s-960.jpg)
(http://b.a.d-cd.net/7445b8s-960.jpg)
(http://c.a.d-cd.net/c7445b8s-960.jpg)
(http://a.a.d-cd.net/57445b8s-960.jpg)
(http://f.a.d-cd.net/f7445b8s-960.jpg)
(http://a.a.d-cd.net/e2c45b8s-960.jpg)
(http://e.a.d-cd.net/4ac45b8s-960.jpg)
(http://b.a.d-cd.net/3ac45b8s-960.jpg)
-
nice job :good: :sablja: :respekt:
-
nice job :good: :sablja: :respekt:
thx bro :drink:
-
(http://e.a.d-cd.net/ac951d8s-960.jpg)
(http://b.a.d-cd.net/fc951d8s-960.jpg)
(http://c.a.d-cd.net/42951d8s-960.jpg)
(http://e.a.d-cd.net/62951d8s-960.jpg)
(http://f.a.d-cd.net/52951d8s-960.jpg)
(http://d.a.d-cd.net/2a951d8s-960.jpg)
(http://c.a.d-cd.net/aa951d8s-960.jpg)
(http://h.a.d-cd.net/6a951d8s-960.jpg)
(http://b.a.d-cd.net/da951d8s-960.jpg)
-
:good:
-
:good :bravo:
-
guys! suitable motor wiring from Q4 on my QV motor? because my wiring is pretty killed, and sales are now posting from Q4 wiring, here I sit and think is it worth it to buy? :neznam:
-
very very nice,continue in this way. :super:
-
guys! suitable motor wiring from Q4 on my QV motor? because my wiring is pretty killed, and sales are now posting from Q4 wiring, here I sit and think is it worth it to buy? :neznam:
211hp to 232hp ... what is there to think :DD:
-
kobrakai you have 164QV 24v motor, right?
ECU and cables are original from QV but not not in good condition?
You are now wondering to use Q4 ECU and wires?
As you know 164 24v models QV and Q4 have the same power (232bhp) although ECUs are different due to Q4 transmission...anyway will work.
-
kobrakai you have 164QV 24v motor, right?
ECU and cables are original from QV but not not in good condition?
You are now wondering to use Q4 ECU and wires?
As you know 164 24v models QV and Q4 have the same power (232bhp) although ECUs are different due to Q4 transmission...anyway will work.
yes, engine 164 24v qv
yes, ecu and cables from same engine and cables is bad condition
no, now i wanna use only cables from q4 with ecu 164 24qv,but q4 have another motronic, another AFM , so I think a suitable wiring from q4 at qv? or there may be a different pinout? :tres:
-
211hp to 232hp ... what is there to think :DD:
we did not understand each other)) this is my shit english))
I have a 232 hp)
-
we did not understand each other)) this is my shit english))
I have a 232 hp)
:DD: :good:
-
if everything fails ... try this guy http://www.gtvince.com/ (http://www.gtvince.com/)
he has a lot of parts available for 24v QV .... in UK QV is called cloverleaf
;)
-
yes, engine 164 24v qv
yes, ecu and cables from same engine and cables is bad condition
no, now i wanna use only cables from q4 with ecu 164 24qv,but q4 have another motronic, another AFM , so I think a suitable wiring from q4 at qv? or there may be a different pinout? :tres:
Hard to say if QV ECU and Q4 wires will fit? I didn't try this.
I have original Q4 ECU and wire installation.
If you have a chance to try it without purchasing Q4 installation it's OK, otherwise can be tricky that you burned money for nothing...
I would rather in your case look for new QV wire installation even if this mean to buy also QV ECU.
-
Igor, it's all good, but where's and take this new wiring? )) :D:
-
Igor, it's all good, but where's and take this new wiring? )) :D:
check the link zekan provided: http://www.gtvince.com (http://www.gtvince.com) and contact guy
also you can try to find in e-bay
Greetings from MOSKBA :D:
-
Q4 and QV are completely different regarding wires and ECU. Q4 runs sequential ignition and fuel, while QV runs everything like regular 24v (sequent ign and full group fuel). If you plan to use QV ecu, find std wiring for 24v motronic m1.7 but double check everything!
-
check the link zekan provided: [url]http://www.gtvince.com[/url] ([url]http://www.gtvince.com[/url]) and contact guy
also you can try to find in e-bay
Greetings from MOSKBA :D:
ооооооuuuu :D:
You already drank Russian vodka? :drink:
[privitak je izbrisao admin]
-
OMG :shock: .
I didn't knew that the Russian police is in such dissorder that they need Grdi to clean it up. :D: :D:
хорошей форме, товарищ :D: :D:
-
(http://g.a.d-cd.net/3f0b4f8s-960.jpg)
(http://b.a.d-cd.net/808b4f8s-960.jpg)
(http://f.a.d-cd.net/d08b4f8s-960.jpg)
(http://h.a.d-cd.net/b08b4f8s-960.jpg)
(http://h.a.d-cd.net/288b4f8s-960.jpg)
(http://d.a.d-cd.net/688b4f8s-960.jpg)
(http://e.a.d-cd.net/388b4f8s-960.jpg)
(http://d.a.d-cd.net/f88b4f8s-960.jpg)
(http://h.a.d-cd.net/648b4f8s-960.jpg)
(http://g.a.d-cd.net/e48b4f8s-960.jpg)
(http://c.a.d-cd.net/148b4f8s-960.jpg)
(http://c.a.d-cd.net/948b4f8s-960.jpg)
(http://h.a.d-cd.net/f48b4f8s-960.jpg)
(http://e.a.d-cd.net/c8b4f8s-960.jpg)
(http://c.a.d-cd.net/8c8b4f8s-960.jpg)
(http://e.a.d-cd.net/bc8b4f8s-960.jpg)
(http://d.a.d-cd.net/7c8b4f8s-960.jpg)
(http://a.a.d-cd.net/fc8b4f8s-960.jpg)
(http://b.a.d-cd.net/28b4f8s-960.jpg)
(http://e.a.d-cd.net/528b4f8s-960.jpg)
-
pederlook edizione :D:
-
rujevica edizione :zvizd:
-
:DD:
-
bad new's from slav's Ukraine
it's maybe WAR man's (((
(http://cs7002.vk.me/c7007/v7007980/cba9/wDL14-zv3vE.jpg)
(http://cs7002.vk.me/c540106/v540106379/1c4ba/3k9gFo3hn5g.jpg)
(http://cs616128.vk.me/v616128794/4584/VlEhM-owxnQ.jpg)
(http://cs616128.vk.me/v616128794/4572/wz-VV7AboOU.jpg)
(http://cs7002.vk.me/c7007/v7007954/b4cf/empiRz8cLp4.jpg)
(http://cs7002.vk.me/c7007/v7007954/b4bd/3Gz_kt4ZanQ.jpg)
(http://cs7002.vk.me/c7007/v7007954/b4d8/G7UYeP36MtU.jpg)
(http://cs7002.vk.me/c7007/v7007235/a60b/CO9MAl1z9kA.jpg)
(http://cs7002.vk.me/c7007/v7007954/b480/j0S3jSmVfYA.jpg)
-
Take care! Be careful!
-
https://www.youtube.com/watch?v=C9WZIWlgkbM (https://www.youtube.com/watch?v=C9WZIWlgkbM)
-
Take care! Be careful!
Thx bro! we are fighting for our freedom and against the criminal regime!
-
cool video :good:
give them hell my friend ... too bad I live in a country where everybody's quiet and takes the shit and asks for more
-
https://www.youtube.com/watch?v=C9WZIWlgkbM (https://www.youtube.com/watch?v=C9WZIWlgkbM)
sick man sick, wach your head
-
our excellent police!
https://www.youtube.com/watch?v=YzifnnbOruw#t=16 (https://www.youtube.com/watch?v=YzifnnbOruw#t=16)
https://www.youtube.com/watch?v=H0ax6oRhh9w (https://www.youtube.com/watch?v=H0ax6oRhh9w)
and they paid for it!
https://www.youtube.com/watch?v=ciz5aQ-M_Kc (https://www.youtube.com/watch?v=ciz5aQ-M_Kc)
The Wall (Стіна) on Vimeo (http://vimeo.com/81822809)
-
people pay them with taxes... sick fucks :tup: :tup: :tup2: just hang on what goes around comes around :respekt: :respekt:
-
our excellent police!
[url]https://www.youtube.com/watch?v=YzifnnbOruw#t=16[/url] ([url]https://www.youtube.com/watch?v=YzifnnbOruw#t=16[/url])
[url]https://www.youtube.com/watch?v=H0ax6oRhh9w[/url] ([url]https://www.youtube.com/watch?v=H0ax6oRhh9w[/url])
and they paid for it!
[url]https://www.youtube.com/watch?v=ciz5aQ-M_Kc[/url] ([url]https://www.youtube.com/watch?v=ciz5aQ-M_Kc[/url])
The Wall (Стіна) on Vimeo ([url]http://vimeo.com/81822809[/url])
Show them hell :sablja: and take care!
-
Show them fucking nothing...two parties fighting for own interests, old scenario repeated milion times, nothing new
Hint...stay home or if you really can't due to feelings, stay somewhere in back and wach yourself :good:
-
(http://cs7002.vk.me/c7007/v7007528/8131/RFSTRy7wfUs.jpg)
it's true! :sablja:
-
Hint...stay home or if you really can't due to feelings, stay somewhere in back and wach yourself :good:
100% agree with this!
I've participated in Serbian protests during year 2000, had some beating with police and good portion of tear gas.
And? Received big NOTHING in return.
Be smart; stay with Alfa and your girlfriend. ;)
-
a da poduprem ovu cinjencu, evo jednog posta iz Kieva, a znam i sta mi govore ljudi ovdje u Moskvi koji su inace Ukrainci
private mail from Kiev
if I tell you what really is going here - you'll be shocked. Anything that clarifies the media - is nonsense. A lot of things unsaid and hidden. About the fact that all paid for - I think you guessed and the fact about what no one speaks that the police, who are staying on Maidan, are young boys from academies, universities and institutions.And now, when members of the opposition have given good positions in parliament - they calmed down and agreed to disperse the maidan. The Maidan - it is not for the European Union, and not even for the right to vote. This is because people think they stand for freedom. But no one looks beyond that they are everyone there at will the opposition to come to power. That's it.That's why I'm at home and skeptical of Maidan =) but tssss. Don't tell anyone (yummi)
-
Take care! Be careful!
Thx bro! we are fighting for our freedom and against the criminal regime!
Yet after shit comes down You will be under siege of other people that doesn`t give a sh.. about nothing except their own interests. So ALL politicians are equal. Just thay are more equal then the rest of us.
-
criminal president called us terrorists and gave the order to shoot to kill. democracy :tres:
(http://cs7002.vk.me/c313429/v313429903/701c/IqnFcjlPK_0.jpg)
(http://cs7002.vk.me/c409228/v409228830/87ed/UAZdvt58Z0s.jpg)
(http://cs7002.vk.me/c409228/v409228830/87f7/gPAnMFi6ZYw.jpg)
(http://cs7002.vk.me/c409228/v409228830/8824/XyUNb86wrrY.jpg)
(http://cs7002.vk.me/c7007/v7007238/ae13/CVEwH6p4WUQ.jpg)
-
https://www.youtube.com/watch?v=yjMs_vAV6S8 (https://www.youtube.com/watch?v=yjMs_vAV6S8)
https://www.youtube.com/watch?v=FUMK9M1WJ-0 (https://www.youtube.com/watch?v=FUMK9M1WJ-0)
-
this is sad...this became already an anarchy and leading country into the civil war, believe me you don't want this!
I hope you avoid real war...otherwise you all will cry even for this president...unfortunately we have some experience on this
-
Hang in there....
-
brothers! this is probably the worst day of our country! more than 60 people dead. specials forces fired on unarmed people. they do criminal orders. This is a black day in our history.
drink to the dead people without raising glasses
(http://cs7002.vk.me/c313429/v313429230/78f7/JqudxunnGoc.jpg)
(http://cs7002.vk.me/c322630/v322630044/776b/XTJAhRxBgwA.jpg)
(http://cs7002.vk.me/c322630/v322630044/7786/a2tvxbKi5h0.jpg)
(http://cs7002.vk.me/c322630/v322630044/77a1/x4FKiUCIqDs.jpg)
(http://cs312124.vk.me/v312124927/91d2/7ZZ4vQRx7Dc.jpg)
(http://cs7002.vk.me/c607625/v607625262/288f/RC4TU1TmXSc.jpg)
https://www.youtube.com/watch?v=T6IbEIBhb8o (https://www.youtube.com/watch?v=T6IbEIBhb8o)
https://www.youtube.com/watch?v=JsAok9F7w8U (https://www.youtube.com/watch?v=JsAok9F7w8U)
-
Hold it, do not give up :sablja: :good:
-
Hold it, do not give up :sablja: :good:
thx bro!
the spirit of the Ukrainian people not to break, but the bloodshed must end
-
Stay out of this shit. Its not worth to die for any ideals. Dont worry about ukraine, it will still be there when this ends. Watch your head my friend.
-
money money money :tres: :tres: :tres: :tres:
-
I hope that the bloodshed will end that there will be a peaceful agreement with fair elections.
As grdi said war is not an option it just brings misery and even more hatered.
-
(http://cs620418.vk.me/v620418768/648/SdfcDgTo6mk.jpg)
(http://cs614831.vk.me/v614831330/7fd8/Y9ONtdHz9IE.jpg)
(http://cs614831.vk.me/v614831330/8005/Vd3Coe59Rhw.jpg)
(http://cs614831.vk.me/v614831330/8019/Kec686fYNxs.jpg)
(http://cs614916.vk.me/v614916330/92fb/7w_NHY-AnJQ.jpg)
(http://cs614916.vk.me/v614916330/930d/inureeNr9II.jpg)
(http://cs614916.vk.me/v614916330/92f2/Z2TN_L4u2hc.jpg)
(https://pp.vk.me/c618828/v618828620/2cf8/1Z2tOihF47g.jpg)
(https://pp.vk.me/c618828/v618828620/2d16/EeH0b9HWgqA.jpg)
(https://pp.vk.me/c618828/v618828620/2d20/aG4m9X7GrlU.jpg)
(https://pp.vk.me/c618828/v618828620/2d2a/1xCcmYSXFYY.jpg)
(https://pp.vk.me/c618828/v618828620/2d34/WeD875fWCj8.jpg)
(http://cs616724.vk.me/v616724330/a94f/dgMaAImKmz0.jpg)
(http://cs616724.vk.me/v616724330/a94e/zVRxiBNBx9s.jpg)
(http://cs616724.vk.me/v616724330/a938/c0pTXy_7ib8.jpg)
(http://cs616724.vk.me/v616724330/a926/KBmI3wu_9mA.jpg)
(http://cs616724.vk.me/v616724330/a92f/uUszrW0bVZQ.jpg)
-
:super: :super: :super: :good:
-
nice job :super:
-
:sablja: :sablja:
-
(http://cs619330.vk.me/v619330768/7007/bi8stotH50w.jpg)
(http://cs619330.vk.me/v619330768/7022/CUpQJJj6yvM.jpg)
(http://cs619330.vk.me/v619330768/702c/sONfyUQescw.jpg)
(http://cs619330.vk.me/v619330768/7036/aWv-EosI_J0.jpg)
(http://cs619330.vk.me/v619330768/6fb7/o6dcXOwUVmo.jpg)
(http://cs619330.vk.me/v619330768/6fc1/WOdyjORFxCA.jpg)
(http://cs619330.vk.me/v619330768/6fcb/VLLVR5_FYm0.jpg)
(http://cs619330.vk.me/v619330768/6fe9/phyYeVwWp3U.jpg)
(http://cs619330.vk.me/v619330768/6ff3/yH1mE8Wwpbk.jpg)
(http://cs619330.vk.me/v619330768/6ffd/2pHNR9I3dZ0.jpg)
(http://)
-
Ignition noup! :tres: connected alternator and starter. Reaction "zero."
Can not understand it. No Ignition, not even alfa control is not blinking. wtf :neznam:
-
:tres:
-
new photos in previous page :crveni:
-
did you toast your ECU maybe?
-
ARC should blink, even with a fried ECU. Have you checked the wiring? Probably the ground.
-
like all checked , grounding twirled on the body, but nothing changes :neznam:
-
did you toast your ECU maybe?
How can they be toast? on the ECU have Motronic relay and fuse
-
did you toast your ECU maybe?
How can they be toast? on the ECU have Motronic relay and fuse
maybe something happened before you put ground wire to the body ... or something ... did you hear the engine run before you bought it ... who knows what happened :neznam: ... wait a few days until electrics guru here comes on ... maybe he will know what to do :nod:
-
faulty ignition socket?
Everything connected correctly? Have you tried the starter hot ( connecting the two poles on the back of it)? Although as you describe it it seems as if you have no power at all- Do you get any reaction from the dash and the ARC when you turn the key?
-
Ignition noup! :tres: connected alternator and starter. Reaction "zero."
Can not understand it. No Ignition, not even alfa control is not blinking. wtf :neznam:
did you check the alternator before mounting? so on dry without ECU?
If yes and you are sure everything is OK did you check if you get the signal from the ECU towards alternator?
you sure you have the signal from the starter towards ECU?
so either signal path is fucked up either ECU...considering starter and alternator are fully OK
-
faulty ignition socket?
Everything connected correctly? Have you tried the starter hot ( connecting the two poles on the back of it)? Although as you describe it it seems as if you have no power at all- Do you get any reaction from the dash and the ARC when you turn the key?
Exactly Isus. no power at all! have no reaction to turn the key, not on the dashboard not on ARC :tres: Starter lock did not try it makes no sense in this situation
-
check all the wires. It looks as if you missed a connection or a wire damaged.
-
i fucking made it :sablja:
https://www.youtube.com/watch?v=Cim0qMlUBTs (https://www.youtube.com/watch?v=Cim0qMlUBTs)
-
:super:
-
all the pretty colors :D: :super:
-
boys help with cardan.
began to gather, the front part of the 3.0 V6. the rear part of the twin spark
can `t connect them, under cross coupling from v6, small in diameter studs and cross from Twin Spark does not sit on the splined cardan v6 :neznam:
-
Ts rear can only match with td front cardan.
-
2.5 V6 cardan fits to the rear of the TS
-
with small modifications everything can fit to everything...TS has by default small rear kardan rubber while 3.0 V6, 1.8turbo and 2.4TD have big, take a look in my topic, middle and rear big rubber
-
The problem is the middle cross on the front part of the v6 cardan. Im not sure if the crosses are interchangeable. If the splines are same there is no problem.
-
https://www.youtube.com/watch?v=xxuP_rZe9f0 (https://www.youtube.com/watch?v=xxuP_rZe9f0)
whats going on? :tres:
-
(http://cs616530.vk.me/v616530330/16e84/CMYAogCs5Wc.jpg)
(http://cs616530.vk.me/v616530330/16e9f/ZVRFHdz3lyE.jpg)
(http://cs616530.vk.me/v616530330/16e93/YBVAOJ17dkY.jpg)
(http://cs616530.vk.me/v616530330/16e90/F2ihUPGZ4h0.jpg)
(http://cs616530.vk.me/v616530330/16eb1/w9Aa1LzGKYk.jpg)
(http://cs616530.vk.me/v616530330/16eba/6SZMDfcIztg.jpg)
cardan 2.5 v6 + TS